Design characteristics of dust collector for smelting furnace

1. Using a thin plate type lifting valve to achieve offline three states and complete ash cleaning.
2. Adopting an automatically controlled offline ash cleaning mechanism, fully utilizing the role of compressed air injection for ash cleaning, resulting in more stable operation.
3. The use of inlet air equalization pipes and ash hopper diversion technology ensures more uniform airflow in the compartments.
4. The dust collector is equipped with an even temperature settling section, which can avoid direct erosion of the filter bag by high-temperature flue gas and improve its service life.
5. The pressure equalizing in the settlement section can be used to reduce the load of the filter bag, and the local Drag coefficient and flow rate of each section from the air inlet to the filter bag, from the checkerboard to the air outlet are low, so the resistance loss is low.
6. The dust removal efficiency can reach over 99.99%, and the emission concentration is less than 10mg/m3.