Pulse
The dust collector is mainly composed of an upper box, a middle box, an ash hopper, an air inlet equalizing pipe, a support filter bag, an injection device, and an ash unloading device. The dust-laden gas enters the ash hoppers of each compartment from the air inlet uniform flow pipe of the dust collector, and under the guidance of the ash hopper diversion device, the large particles of dust are separated and directly fall into the ash hopper, while the finer dust enters the ash hopper evenly. The middle box is adsorbed on the outer surface of the filter bag, and the clean gas enters the upper box through the filter bag, and is discharged into the atmosphere through each off-line valve and exhaust pipe. As the filtering process progresses, the dust on the filter bag accumulates more and more. When the resistance of the equipment reaches the limited resistance value (generally set to 1500Pa), the dust removal control device will press the differential pressure setting value or the dust removal time After the set value automatically closes the off-line valve in one room, open the electric control pulse valve according to the set program, and stop the air blowing, and use the compressed air to blow instantly to increase the pressure in the filter bag and shake off the dust on the filter bag (Even fine dust can be cleaned more thoroughly) into the ash hopper and discharged by the ash discharge mechanism.
Whirlwind
After the cyclone dust collector is equipped with a bypass, its working principle is that the dust-laden gas enters tangentially from the inlet. While the airflow obtains rotational motion, the airflow is separated from the upper and lower sides to form a double spiral movement, and the dust is strongly generated at the boundary of the double spiral. Coarse dust particles are separated to the outer wall with the downward spiral airflow, part of the dust is drawn out from the opening in the middle of the bypass separation chamber, and the remaining dust is carried into the ash hopper by the downward airflow. The upper vortex airflow has the effect of gathering fine dust particles, thereby improving the dust removal efficiency. This part of the finer dust particles is carried upward by the upper spiral airflow, forming a strongly rotating upper dust ring under the top cover, and enters the upper hole of the bypass separation chamber together with the upper spiral airflow, and is introduced into the cone through the air return port. Converging with the internal airflow, the purified gas is discharged from the exhaust pipe, and the separated dust enters the hopper.
Stand-alone
The dusty gas enters the box and is filtered by the flat bag filter. The dust is blocked on the outer surface of the filter bag. The purified gas enters the fan through the filter bag and is directly discharged by the fan. As the filtration time increases, the filter bag The dust attached to the outside is also increasing, and the resistance of the filter bag is also increased accordingly, which affects the dust removal efficiency. At this time, the vibrating mechanism is started to shake off the dust attached to the surface of the filter bag, and the dust falling in the drawer is manually collected. Pull out to clear.
Working principle of stand-alone dust collector:
The dusty gas enters the box through the air inlet, and is filtered by the filter bag. The dust is blocked on the outer surface of the filter bag, and the purified gas is discharged from the box by the fan through the air outlet, and directly discharged into the room (it can also be connected to the air duct. exhaust to the outside).
With the continuous operation of the main engine, the dust adhered to the outside of the filter bag continues to increase, and the resistance of the equipment continues to rise. Therefore, it is necessary to carry out dust cleaning, so that the dust sticking to the outside of the filter bag is shaken off and falls to the dust collector through the ash hopper ( drawer) to be removed manually.
Multiple tubes
The dust-laden gas enters the gas distribution chamber from the main air intake pipe, and then enters the annular space between the ceramic cyclone body and the deflector. The deflector makes the gas change from linear motion to circular motion. Most of the rotating air flow spirals downward from the cylinder along the cyclone and flows toward the cone. The dust-laden gas generates centrifugal force during the rotation process, and the density is greater than The dust particles of the gas are thrown towards the cylinder wall. When the dust particles are in contact with the cylinder wall, they lose the inertial force and fall down along the wall surface into the ash discharge port and enter the main ash hopper by the momentum of the entrance velocity and the downward gravity. When the rotating and descending external swirling airflow reaches the lower end of the cone, due to the contraction of the cone, it will continue to do spiral flow (clean air) from bottom to top in the same direction of rotation in the direction of the cyclone tube axis, and pass through the exhaust pipe of the ceramic cyclone body It enters the exhaust chamber and is discharged from the main exhaust port.
What Is The Working Principle Of Dust Removal Equipment?
Jun 07, 2023
Leave a message







