Maintenance Requirements For Dust Removal Equipment

How to maintain dust removal equipment, before this, we have explained the consequences of industrial vacuum cleaners not paying attention to maintenance or using incorrect methods. Here we introduce how to properly use and maintain the vacuum cleaner.
A wide variety of dust removal equipment, models, specifications, structural performance and functional characteristics are different. Before use, it is necessary to read the instructions carefully to avoid damage to industrial vacuum cleaners and the safety of users due to improper use.
Second, the ambient temperature of the use of ordinary industrial vacuum cleaners can not exceed 40 degrees, the workplace can not be above 1000 meters above sea level, there must be a good ventilation environment, and the air can not be used in the dry room environment of flammable and corrosive gases.
Third, dry dust removal equipment does not allow water absorption, wet hands can not operate the vacuum cleaner. If the place that needs to be cleaned has large paper balls, plastic sheets or waste waste larger than the diameter of the straw, it should be removed in advance, otherwise it is easy to cause straw blockage. 6. When industrial vacuum cleaners absorb liquid substances, the filter element should be removed and the liquid should be emptied in time.
Fourth, connect the ground wire to ensure the safety of electricity. The general industrial vacuum cleaner should work continuously for no more than 8 hours each time, mainly to prevent the motor from overheating and burning. And there is a special design of industrial vacuum cleaner due to the use of special cooling system, can work for 36 hours without stopping, can be used with machine tools.
When using an industrial vacuum cleaner equipped with an automatic winding device, pull out the power cord to a sufficient length, do not pull over the power cord, if you see a yellow or red mark on the power cord, you must stop pulling out immediately to prevent overpulling the power cord. If you need to roll back the power cord, directly press the button to automatically pull back.
Do not overextend and bend the industrial vacuum cleaner hose or fold it frequently, which will affect the life of the industrial vacuum cleaner hose.
Seven. Check whether the power plug and power cord of the dust removal equipment are damaged, and the leakage will burn out the industrial vacuum cleaner motor.
Eight, the mobile dust removal equipment should be careful not to be hit, to prevent the industrial vacuum cleaner barrel body damage leakage, reduce the suction of the industrial vacuum cleaner.
Nine, Put the machine in a ventilated and dry place when not in use. Do not support long-term continuous work of the industrial vacuum cleaner, the continuous working time should be controlled within the working time supported by the industrial vacuum cleaner, do not overload work, otherwise affect the life of the industrial vacuum cleaner.
Ten, If the main engine of the dust removal equipment is hot, has a burnt smell, or the industrial vacuum cleaner is abnormal shaking and sound, it should be stopped and sent for repair immediately, and do not overload the use of industrial vacuum cleaners.