Mechanical grate incinerator
Working principle: Garbage through the hopper into the inclined downward grate (grate is divided into dry zone, burning zone, burning zone), due to the staggered movement between the grate, the garbage will be pushed down, so that the garbage in turn through the various areas of the grate (garbage from one area into another area, play a big turn over the role), until the burning out of the furnace. Combustion air enters from the lower grate and mixes with garbage; The high-temperature flue gas generates hot steam through the heating surface of the boiler, and the flue gas is cooled at the same time, and finally the flue gas is treated by the flue gas treatment device.
Features: Grate material requirements and processing accuracy requirements are high, the contact surface between the grate and the grate is quite smooth, the gap between the row and the row is quite small. In addition, the mechanical structure is complex, the damage rate is high, and the maintenance amount is large. The high cost and maintenance of grate furnace make it difficult to popularize and apply in China.
Fluidized bed incinerator
Working principle: The furnace body is composed of porous distribution plates, adding a large amount of quartz sand in the furnace, heating the quartz sand to more than 600 ° C, and blowing hot air above 200 ° C at the bottom of the furnace, so that the hot sand boils up, and then put into garbage. The garbage boils with the hot sand, and the garbage is quickly dried, caught on fire, and burned. The proportion of unburned waste is light, continue to boil and burn, the proportion of burned waste is larger, fall to the bottom of the furnace, after water cooling, with the sorting equipment will be coarse slag, fine slag to the plant, a small amount of medium slag and quartz sand through the lifting equipment sent back to the furnace to continue to use.
Features: The fluidized bed combustion is full, the combustion control in the furnace is better, but the dust in the flue gas is large, the operation is complex, the operation cost is high, the fuel particle size uniformity is required to be high, the high-power crushing device is required, the quartz sand has serious wear on the equipment, and the equipment maintenance is large.
Rotary incinerator
Working principle: Rotary incinerator is a cooling water pipe or refractory arranged along the furnace body, the furnace body is placed horizontally and slightly inclined. Through the continuous operation of the furnace body, the refuse in the furnace body is fully burned, and at the same time, it moves towards the inclined direction of the furnace body until it is burned out and discharged from the furnace body.
Features: high equipment utilization rate, low carbon content in ash, low excess air, low harmful gas emissions. However, combustion is not easy to control, and it is difficult to burn when the calorific value of garbage is low.
CAO incinerator
Working principle: The waste is transported to the storage pit, into the biochemical treatment tank, and dehydrated under the action of microorganisms, so that natural organic matter (kitchen waste, leaves, grass, etc.) is decomposed into powder, and other solid materials including synthetic organic matter such as plastic rubber and inorganic matter in the waste can not be decomposed into powder. After screening, the non-pulverized waste enters the incinerator into the first combustion chamber (temperature is 600℃), the generated combustible gas then enters the second combustion chamber, and the non-combustible and non-pyrolytic components are discharged in the first combustion chamber as ash and slag. The temperature of the second chamber is controlled at 860℃ for combustion, and the high-temperature flue gas heats the boiler to produce steam. The flue gas is discharged to the atmosphere by the chimney after treatment, and the metal glass will not be oxidized or melted in the first combustion chamber, and can be sorted and recovered in the ash.
Features: useful substances in recyclable garbage; However, the processing capacity of a single incinerator is small and the processing time is long. At present, the daily processing capacity of a single furnace reaches a maximum of 150 tons. Because the residence time of the flue gas above 850 ° C is difficult to exceed 1 second, the dioxin content in the flue gas is high, and the environmental protection is difficult to meet the standard.







